Three Rollers Rolling Machine with Pre-Bending and Cone Rolling

• Customization: Available
• After-sales Service: Online Service
• Warranty: 12 Months
• Model NO.: JT-JZ
• Rolling Shape: Cone
• Product: Steel Ball, Profile, Rolling Beam, Steel Billet, Cogged Ingot, Cone
• Roller Position: Horizontal
• Roller Number: Three-High
• Layout: as Required
• Type: Cold Rolling Mill
• Transport Package: Sea Worthy
• Specification: 3200*2000*2500mm
• Trademark: Jotun
• Origin: China
• Production Capacity: 200 Sets/Month
• Package Size: 320.00cm * 200.00cm * 250.00cm
• Package Gross Weight: 7500.000kg

Product Description

Products Description

Cone Rolling Machine

Cone rolling machine is mainly composed of tapered work rollers (one upper roller, two down rollers), frame (steel plate
splicing), hydraulic moving system, power and transmission system, control system, etc. Three rollers are fully driven, three
rollers are tapered, and the line speed is automatically matched, making it easier to roll tapered workpieces without slipping.

 

Product Parameters

 

Model	JT-10*1500 mm
Max Rolling Thickness	10(SUS)mm
Max Rolling Width	1500mm
Motor Power	4*3kw
Hydraulic station motor power	5.5kw
Reducer	3BW
Rolling range(r--R--θ)	25-750-60°Mm
Machine Size	3200*2000*2500mm
Machine Weight	7.5Tons
Roller diameter	420mm
Roller material	42CrMo forging surface quenched
Oil cylinder material	45 # steel, heat treated HRC48-50
Conical barrels with a small blanking radius of R or more, a large radius of R or less, and a blanking angle of θ or more can be rolled.

 

Effect Display

 

 

 

 

 

 

Product Features

 

Calculate the rated load of the equipment based on the 60-degree cone barrel, maximum thickness, and
maximum rolling width of the finished workpiece.
* There are 3 working motors, all of which rotate synchronously and actively, and are selected according to 1.2 times the rated
load.
* Three cycloidal pinwheel reducers, selected according to 1.5 times the rated load.
* The connection between the reducer and the shaft is installed with a shaft, the machined surface and coaxiality are precise,
and the coupling is not hard-connected, so the reducer is not easily damaged.
* Maximize the diameter of the shaft head and select the bearing according to 2.5 times the rated load.
* Control the wireless remote control.
* The hydraulic station is equipped with a two-link solenoid valve, an electromagnetic relief valve, and an axial piston pump.
*The hydraulic cylinder should be selected based on twice the rated load at 25MPA.

 

Products Show

Certifications